Mass Casualty Unit

NAFFCO
Mass Casualty Unit

The superstructure os made of aluminum profiles 6061 T6, fastened to a strong base structure made of stainless steel tubing.Connectors being used in assembling the profiles are of stainless steel 316L grade. The full superstructure assembly is mounted on auxiliary frame by means of conical rubber bearings.

Highlights
  • The superstructure os made of aluminum.
  • Side Storage Lockers.
  • Rear Storage Lockers
  • Designed by NAFFCO’s experienced engineers.
top-right-section (1)

Mass Casualty Unit

Construction and Design
The superstructure os made of aluminum profiles 6061 T6, fastened to a strong base structure made of stainless steel tubing.Connectors being used in assembling the profiles are of stainless steel 316L grade. The full superstructure assembly is mounted on auxiliary frame by means of conical rubber bearings.. This frame itself shall be mounted on chassis, in compliance with vehicle manufacturer standards. The full concept of the superstructure design and mounting will reduce the stresses in body works, minimize the dynamic stresses in chassis components and improve the vehicle off road capabilities.
The paneling shall be done by single external skin, using aluminum plates 3mm thick, bonded to structure by heave duty glue..The plates are bended, formed, and integrated in such a way that will ensure maximum durability as well as a compact design.. Roof rails are designed as part of the structure paneling raised to 200mm above roof level. The rails serve also as housing for the external illumination lamps.
Side Storage Lockers
The space behind the cabin shall be designed as storage lockers. There are six (6) storage lockers, three (3) on the R/H side and three (3) on the L/H side of the vehicle. Design of the lockers shall allow max storage capacity and fas removal of any accessories and equipment delivered with the vehicle. The lockers are closed by light alloy roller shutters.
Rear Storage Lockers
At rear of vehicle, storage locker shall be provided with aluminum shutters. Access to the locker is provided by slide-tail type ladder for every deployment of all accessories stored.
Lockers Interior
The interior of the lockers shall be painted in grey matte finish, except the exposed aluminum extrusions which shall be kept in their original anodized silver matte finish, shelves, partitions, tool boards, drawers are provided inside the storage lockers.

 

 

 

95 Person Disaster Support Kit

  • Spine board: 75 pcs
  • Folding stretcher: 75 pcs
  • Scoop stretcher: 8 pcs
  • Medium industrial lid container: 15 pcs
  • Large industrial lid container: 15 pcs
  • Oxygen cylinder jumbo ‘D’ size: 90 pcs
  • Emergency kit-CPR kit, Medibag class III: 20 pcs
  • Emergency box-CPR kit, explorer: 6 pcs
  • Casualty support kit can be tailor made to customer requirements.
  • Inflatable tent: 1 pc
  • Rechargeable spot light: 20 pcs
  • Flag pole: 20 pcs
  • Hand held microphone: 1 pc
  • Helmer: 20 pcs
  • Traffic cones: 14 pcs
  • Trauma kit: 12 pcs
  • Head immobilizer: 20 pcs

 

 

Contact Us